The 100X Automated Filter Tester is designed for test and quality control validation of filter media, cartridges and masks used in medical and industrial hygiene applications. The 100X meets leading global industry standards such as NIOSH 42 CFR Part 84, GB 2626 and EN 13274-7:2019.
The 100X is a high capacity automated solution ideally suited to meet the precise and rigorous requirements of both development and production quality control environments.The 100X is perfect for testing N95, KN95 and FFP respirator masks that are widely used to help prevent the spread of the new Coronavirus.
Best-in-Class Performance
The 100X is a highly accurate, flexible test rig for a wide range of filter media types designed to optimize production yields while delivering the lowest cost of ownership. The 100X can be configured with your choice of four differential pressure measurement ranges, providing highly accurate, repeatable results that minimize false failures, while increasing both production yields and confidence in the test results.
Automatic, Hybrid & Manual Configurations
The 100X can be configured at time of order to operate in three ways:
A Manual version
The Manual version is ideal for lab use or production lot testing that requires the operator to initiate the test using ergonomic photoelectric actuators. A test fixture for 100 cm2 flat sheet media is included.
An Automatic version
The Automatic version integrates seamlessly with a customer designed, PLC-driven, automated production line and is ideal for 100% in-line non-destructive product testing. The unit is controlled via communication ports and becomes a client device to the automated production line.
A Hybrid version
The Hybrid version provides the versatility to operate in Manual mode using the local test fixture or can be switched to Automatic mode using a remote fixture in an automated production environment.
Meets Global Industry Standards
-
NIOSH 42 CFR Part 84: Respiratory Devices
-
ISO 23328: Breathing System Filters for Anesthetic and Respiratory Use
-
GB 2626: Respiratory Protective Devices
-
JICOSH/JMOL
-
GB 19083
-
GB/T 32610
-
YY 0469
-
N 13274-7:2019 Paraffin Test
Key Features and Benefits:
-
100% Sampling Aerosol Detection System
-
Three flow rate options up to 170 L/min
-
Best-in-Class Differential Pressure Measurement Accuracy
-
Measure Filter Efficiency up to 99.9995%
-
Patented Aerosol Replenishment System Eliminates Production Downtime
-
Automatic, Hybrid & Manual Configurations
-
Quiet – Ideal for QC and R&D Labs
Wide Range of Aerosol Flow Rates
The 100X is capable of air flow rates between 10-170 liters per minute, providing flexibility to test a wide range of filter types. Integrated flow controller keeps flow rates constant leading to more accurate results. The 100X can be configured with your choice of four differential pressure measurement ranges, providing highly accurate, repeatable results that minimize false failures, while increasing both production yields and confidence in the test results.
Oil or Salt Aerosol Generation
The 100X is available in either an Oil (DOP, PAO, Paraffin) or Salt (NaCl) aerosol generation models. The patented Aerosol Solution Replenishment System is a separate 2-liter reservoir tank that increases productivity by eliminating the need to shut down production to refill the generator. For salt-based test systems, the replenishment system mitigates aerosol concentration and size / distribution shifts due to dynamic salinity.
100% Sampling Aerosol Detection System
The 100% Sampling Aerosol Detection System is capable of testing a wide range of HEPA and ULPA filters, up to 99.9995% efficiency. Its innovative design provides a single source of truth, reduces potential sampling errors inherent in legacy designs and with fewer, more robust parts, reduces serviceability costs while increasing equipment uptime.
Applications:
-
Flat Sheet Filter Media HEPA, ULPA
-
Filtering Face Pieces
-
Medical Device Filters